[2024] Pass FCP_FMG_AD-7.4 Exam - Real Questions and Answers
FCP_FMG_AD-7.4 Exam Questions Get Updated [2024] with Correct Answers
NEW QUESTION # 22
Refer to the exhibit.
Given the configuration shown in the exhibit, which two conclusions can you draw from the installation targets in the Install On column? (Choose two.)
- A. Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Target
- B. Policy seq.# 1 will be installed on the ISFW device root[NAT] and Student[NAT] VDOMs only.
- C. Policy seq.# 3 will be skipped because no installation targets are specified.
- D. Policy seq.S will be installed on all managed devices and VDOMs that are listed under Installation Targets
Answer: B,D
Explanation:
* Option A: Policy seq.S will be installed on all managed devices and VDOMs that are listed under Installation Targets.This is correct. The "Install On" column indicates that the policy is targeted for installation on all listed managed devices and VDOMs under Installation Targets.
* Option D: Policy seq.# 1 will be installed on the ISFW device root[NAT] and Student[NAT] VDOMs only.This is correct. Policy sequence #1 specifies that it will be installed only on the ISFW device and the VDOMs 'root[NAT]' and 'Student[NAT]' as indicated by the "Install On" column.
Explanation of Incorrect Options:
* Option B: Policy seq.# 3 will be skipped because no installation targets are specifiedis incorrect because it is clearly listed under "Installation Targets," which means it will be installed according to the specified configuration.
* Option C: Policy seq.# 2 will not be installed on the Local-FortiGate root VDOM because there is no root VDOM in the Installation Targetis incorrect as the exhibit does not show any specific exclusion for seq.# 2 on the Local-FortiGate root VDOM.
FortiManager References:
* Refer to the FortiManager Administration Guide sections on "Policy Packages" and "Policy Installation Targets" for more details.
NEW QUESTION # 23
Refer to the exhibit.
What percent of the available RAM is being used by the process in charge of downloading the web and email filter databases from the public FortiGuard servers?
- A. 2.9
- B. 1.5
- C. 3.1
- D. 4.1
Answer: A
Explanation:
In the exhibit, the FortiManager CLI output displays the results of thetopcommand, which shows system processes, CPU usage, and memory (RAM) usage. We are specifically looking for the process responsible for downloading theweb and email filter databasesfrom the public FortiGuard servers. This process is typically handled by thefgdlinkdprocess.
Key information from the output:
* Thefgdlinkdprocess is listed with aPID of 1463.
* The%MEMcolumn shows that this process is using2.9%of the available RAM.
Evaluation of Options:
* A. 2.9: This iscorrect. Thefgdlinkdprocess, which handles the web and email filter database downloads, is using2.9%of the available memory, as indicated in the%MEMcolumn.
* B. 3.1: This is incorrect. The3.1%memory usage belongs to thefwmsvrdprocess, not the fgdlinkd process.
* C. 1.5: This is incorrect. The1.5%memory usage belongs to thefclinkdprocess, not the fgdlinkd process.
* D. 4.1: This is incorrect. The4.1%memory usage belongs to thefgdsvrprocess, not the fgdlinkd process.
NEW QUESTION # 24
An administrator wants to create a policy on an ADOM that is in backup mode and install it on a FortiGate device in the same ADOM. How can the administrator perform this task?
- A. The administrator must use a FortiManager script.
- B. The administrator must change the ADOM mode to Advanced to bring the FortiManager online.
- C. The administrator must disable the FortiManager offline mode first.
- D. The administrator must use the Policy & Objects section to create a policy first.
Answer: A
Explanation:
To create and install a policy on a FortiGate device in an ADOM (Administrative Domain) that is in backup mode, the administrator must use a FortiManager script. This is because backup mode restricts direct configuration changes, and scripts can be used to push specific configuration changes without altering the ADOM mode.
Options A, C, and D are incorrect because:
* A requires the ADOM to be in normal or advanced mode to create policies directly in the Policy & Objects section.
* C suggests disabling offline mode, which is irrelevant to the backup mode configuration.
* D implies changing the ADOM mode, which is unnecessary if using a script to perform the task.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Working with ADOMs and Using Scripts for managing policies in backup mode.
NEW QUESTION # 25
Exhibit.
What is true about the objects highlighted in the image?
- A. They are available across all ADOMs by default.
- B. They can be used as variables in scripts.
- C. They can be set to optional or required.
- D. They cannot be created in the global database ADOM.
Answer: B
Explanation:
The objects highlighted in the image (DMZ_SUBNET, ISP1_SUBNET, LAN_SUBNET) aremetadata variables.
* C.They can be used as variables in scripts.
* These metadata variables are placeholders that can be used in FortiManager scripts to dynamically insert specific values, enabling script flexibility and scalability across multiple devices or ADOMs.
Options A, B, and D are incorrect because:
* Asuggests optional or required settings, which do not apply to metadata variables.
* Bimplies they are available across all ADOMs by default, which is not always the case.
* Dstates they cannot be created in the global database ADOM, but metadata variables are typically managed within ADOMs and can be utilized globally based on specific configurations.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Using Metadata Variables and Script Management.
NEW QUESTION # 26
What will be the result of reverting to a previous revision version in the revision history?
- A. It will tag the device settings status as Auto-Update.
- B. It win install configuration changes to managed device automatically.
- C. It will modify the device-level database.
- D. It will generate a new version ID and remove all other revision history versions.
Answer: C
Explanation:
* Option C: It will modify the device-level database.This is correct. Reverting to a previous revision version in the revision history affects the device-level database by restoring it to the state saved in the selected revision. This ensures that any changes made after the selected revision are discarded, and the device configuration is returned to the earlier state.
Explanation of Incorrect Options:
* Option A: It will install configuration changes to managed devices automaticallyis incorrect because reverting a revision does not automatically push changes to the devices; it merely reverts the configuration on the FortiManager.
* Option B: It will tag the device settings status as Auto-Updateis incorrect because "Auto-Update" is not a status related to the revision history mechanism.
* Option D: It will generate a new version ID and remove all other revision history versionsis incorrect as reverting to a previous revision does not delete all other versions; it creates a new revision point for tracking.
FortiManager References:
* Refer to the "Revision Management" section in the FortiManager Administration Guide, which provides an overview of how revisions are managed and utilized for restoring configurations.
NEW QUESTION # 27
Which output is displayed right after moving the ISFW device from one ADOM to another?
- A.
- B.
- C.
- D.
Answer: C
Explanation:
When a FortiGate device, like the ISFW (Internal Segmentation Firewall), is moved from one ADOM to another in FortiManager, the status of the device in the new ADOM will temporarily show some level of inconsistency or unknown state until the ADOM fully syncs and integrates the device.
In the provided options, we are analyzing the FortiManager diagnose dvm device list output for the ISFW device.
Explanation of the Outputs:
* Option A:
* The output shows that the device has the following status:
* dev-db: not modified
* conf: in sync
* cond: OK
* dm: retrieved
* The key part here is the pkg: [unknown]. This suggests that the configuration package for the ADOM in the new environment is still in anunknown state, which happens right after moving the device to a new ADOM. FortiManager needs time to process the device's configuration before syncing it properly.
* Option B:
* This output shows thepkg: [out-of-sync]. This occursaftersome configuration mismatch is identified, but it is not the immediate output after moving a device to a new ADOM.
* Option C:
* This output showspkg: [never-installed], which indicates that no package was ever installed on the device. This status typically appears when a device is newly added to FortiManager but not immediately after moving it between ADOMs.
* Option D:
* This output showspkg: [imported], which indicates that the device configuration has been successfully imported into the new ADOM. This would occur after the device is fully synced, but not immediately after moving the device to a new ADOM.
Conclusion:
The output that is displayedimmediately after movingthe ISFW device from one ADOM to another isOption A, where the package status is still unknown (pkg: [unknown]) because FortiManager has not yet fully synchronized the device's configuration in the new ADOM.
NEW QUESTION # 28
An administrator created a new global policy package that includes header and footer policies and then assigned it to an ADOM. What are two outcomes of this action? (Choose two.)
- A. You must manually move the header and footer policies after the policy assignment.
- B. You can edit or delete all the global objects in the global ADOM.
- C. After you assign the global policy package to an ADOM. the impacted policy packages become hidden in that ADOM.
- D. To assign another global policy package later to the same ADOM. you must unassign this policy first.
Answer: B,D
NEW QUESTION # 29
Exhibit.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. FortiManager is in workflow mode.
- B. The FortiManager ADOM workspace mode is set to Normal
- C. The FortiManager ADOM is locked by the administrator.
- D. An administrator can also lock the Local-FortiGate_root policy package.
Answer: A,C
Explanation:
The provided screenshot from FortiManager shows several key elements that help answer the question:
* Thepadlock iconnext to the "Remote-FortiGate" policy package indicates that this policy package is locked, which means it is currently being edited or has been checked out by an administrator. This is typical behavior when the ADOM (Administrative Domain) workspace is inuse, and a session is active where an administrator is working on a policy package.
* Theabsence of a lock iconnext to "Local-FortiGate_root" and "default" indicates that these policy packages are not locked and are available for editing.
* Statement B(FortiManager is in workflow mode): This istrue. The fact that one of the policy packages is locked suggests that FortiManager is operating inADOM workflow modeor at least in a state where it enforces locking for editing, typically seen in Normal ADOM modes. Inworkflow mode, an administrator needs to lock a workspace before making changes.
* Statement C(The FortiManager ADOM is locked by the administrator): This istrue. The presence of the padlock on "Remote-FortiGate" signifies that the ADOM, or more specifically, this policy package within the ADOM, has been locked by the administrator.
* Statement A(An administrator can also lock the Local-FortiGate_root policy package): This isnot necessarily true. The administrator can lock the "Local-FortiGate_root" policy package, but as shown in the exhibit, it iscurrently not locked, so this option is not a certainty in this state.
* Statement D(The FortiManager ADOM workspace mode is set to Normal): This istrue, but not the best option compared to B and C, as it can be inferred that the mode is set to Normal due to the locking behavior, but the more direct information is about the ADOM being locked by an administrator.
NEW QUESTION # 30
Refer to the exhibit.
Which two results occur if the script is run using the Device Database option? (Choose two.)
- A. The device Config Status is tagged as Modified.
- B. The script history shows successful installation of the script on the remote FortiGate device.
- C. You must install these changes on a managed device using the Install Wizard.
- D. The successful execution of a script on the Device Database creates a new revision history.
Answer: A,C
Explanation:
If the script is run using the "Device Database" option on FortiManager, the following occurs:
* A.You must install these changes on a managed device using the Install Wizard.
* Running the script on the Device Database updates only the configuration in the FortiManager's database, not on the actual FortiGate device. To apply the changes, you need to use the Install Wizard to push these configurations to the managed device.
* D.The device Config Status is tagged as Modified.
* After running the script on the Device Database, FortiManager tags the device's configuration status as "Modified," indicating that there are pending changes that have not yet been installed on the device.
Options B and C are incorrect because:
* Bsuggests a new revision history is created, but this only happens when changes are actually installed on the managed device.
* Cimplies the script is directly executed on the FortiGate, which is not the case when using the Device Database option.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Scripting and Configuration Management.
NEW QUESTION # 31
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package. Fortinet. in the custom ADOM1. What happens to the Fortinet policy package when it is created?
- A. You can select the option to assign the global policies.
- B. You must assign the global policy package from the global ADOM.
- C. The global policy package is automatically assigned.
- D. You must reapply the global policy package to ADOM1.
Answer: C
NEW QUESTION # 32
What is the purpose of ADOM revisions?
- A. To save the current state of the whole ADOM
- B. To save the FortiManager configuration in the System Checkpoints
- C. To revert individual policy packages and device-level settings for a managed FortiGate
- D. To save the current state of all policy packages and objects for an ADOM
Answer: D
Explanation:
* Option B: To save the current state of all policy packages and objects for an ADOMis the correct answer. ADOM (Administrative Domain) revisions in FortiManager are used to create a snapshot of the current state of all policy packages and objects associated with an ADOM. This allows administrators to save a specific configuration state and revert to it if necessary. It helps in managing changes and recovering from configuration errors or unintended changes.
* Explanation of Incorrect Options:
* Option A: To save the current state of the whole ADOMis incorrect because ADOM revisions specifically save only the policy packages and object configurations, not the entire state of the ADOM, which may include logs, reports, and other non-policy data.
* Option C: To revert individual policy packages and device-level settings for a managed FortiGateis incorrect as ADOM revisions are not meant for reverting individual policy packages or device settings; they are designed to handle the entire set of policy packages and objects within an ADOM.
* Option D: To save the FortiManager configuration in the System Checkpointsis incorrect because ADOM revisions do not function as system checkpoints for FortiManager itself; they are specific to ADOM policy packages and objects.
FortiManager References:
* Refer to the FortiManager 7.4 Administration Guide, "ADOM Management" section, which describes the purpose and usage of ADOM revisions for configuration management and restoration.
NEW QUESTION # 33
Which two items are included in the FortiManager backup? (Choose two.)
- A. Flash configuration
- B. FortiGuard database
- C. Firmware images
- D. All devices
Answer: A,D
Explanation:
FortiManager backups include:
* A. All devices- This includes all device configurations managed by FortiManager, such as firewall policies, objects, and other settings.
* D. Flash configuration- This consists of local FortiManager configurations stored in flash memory, such as system settings, scripts, and other locally-stored configurations.
Options B and C are incorrect because:
* B (Firmware images)are not typically included in a FortiManager backup. Firmware images are usually stored separately and managed through a different process.
* C (FortiGuard database)is incorrect as the FortiGuard database, which contains threat intelligence and security signatures, is not part of the standard FortiManager backup.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Backup and Restore Processes.
NEW QUESTION # 34
An administrator is in the process of copying a system template profile between ADOMs by running the following command: execute fmprofile import-profile ADOM2 3547 /tmp/myfile Where does this command import the system template profile from?
- A. Source ADOM policy database
- B. ADOM2 object database
- C. ADOM2 device database
- D. FortiManager file system
Answer: D
Explanation:
The commandexecute fmprofile import-profile ADOM2 3547 /tmp/myfileis used to import a system template profile from the FortiManager file system. The path/tmp/myfileindicates a location in the FortiManager's local file system, from which the profile will be imported into the specified ADOM.
Options B, C, and D are incorrect because:
* B, C, and Dsuggest importing from different databases, which is not accurate since the command explicitly refers to the file system location.
FortiManager References:
* Refer to FortiManager 7.4 CLI Reference Guide: Commands for Profile Management.
NEW QUESTION # 35
What is a characteristic of the FortiManager high availability (HA) feature?
- A. Each cluster member must be upgraded manually, starting with the primary unit.
- B. All secondary units must be in the same network as the primary unit.
- C. The primary unit synchronizes all configuration revision with the seconday units.
- D. When a secondary unit is removed, FortiManager updates the managed devices using TCP port 5199.
Answer: C
NEW QUESTION # 36
Which two items are included in the FortiManager backup? (Choose two.)
- A. Flash configuration
- B. FortiGuard database
- C. Firmware images
- D. All devices
Answer: A,D
NEW QUESTION # 37
Exhibit.
Given the configuration shown in the exhibit, what are two results from this configuration? {Choose two.)
- A. Two or more administrators can make configuration changes at the same time, in the same ADOM.
- B. Concurrent read-write access to an ADOM is disabled.
- C. You can validate administrator login attempts through external servers.
- D. The same administrator can lock more than one ADOM at the same time.
Answer: B,D
Explanation:
The configuration shown in the exhibit sets theworkspace-mode to normal. The workspace mode in FortiManager defines how configuration changes and administrative tasks are handled, specifically regarding locking and collaboration in ADOMs (Administrative Domains).
Understanding the workspace modes:
* Normal Mode:In this mode, only one administrator at a time can lock and edit an ADOM. The changes made by one administrator must be completed and saved before another administrator can make changes. It prevents concurrent read-write access within the same ADOM.
* Workflow Mode:This mode allows multiple administrators to work on different tasks within the same ADOM, but changes still need to be approved before being committed.
Explanation of Options:
* A. You can validate administrator login attempts through external servers.
* This option is unrelated to the workspace mode. External authentication servers can be used for administrator logins, but that is a different configuration setting (not related to workspace-mode).
* B. The same administrator can lock more than one ADOM at the same time.
* This istrue. InNormal mode, an administrator can lock multiple ADOMs, meaning they can work on more than one ADOM simultaneously, but each ADOM can only be accessed by one administrator at a time for read-write purposes.
* C. Two or more administrators can make configuration changes at the same time, in the same ADOM.
* This isfalse. InNormal mode, onlyone administratorcan have read-write access to an ADOM at a time. If another administrator attempts to make changes, they must wait until the ADOM is unlocked by the first administrator.
* D. Concurrent read-write access to an ADOM is disabled.
* This istrue. InNormal mode, concurrent read-write access is disabled. This means only one administrator at a time can make changes to an ADOM. Other administrators can view the ADOM in read-only mode but cannot make changes until the ADOM is unlocked.
NEW QUESTION # 38
Refer to the exhibit.
What can you conclude from the failed installation log shown in the exhibit?
- A. Policy ID 2 is installed in the disabled state.
- B. Policy ID 2 is installed without the remote user student.
- C. Policy ID 2 is installed without a source address.
- D. Policy ID 2 will not be installed.
Answer: B
Explanation:
From the log provided in the exhibit, several conclusions can be drawn regarding the installation of Policy ID
2:
* The installation process fails when attempting to set theLDAP user "student". The log shows:
* "Attribute 'ldap-server' MUST be set.": This error indicates that when setting up the LDAP user configuration, a mandatory field (ldap-server) is missing. As a result, the configuration could not be completed for the user.
* "entry not found in datasource"and"value parse error before 'student'": These errors confirm that the user "student" could not be properly added due to a configuration issue (such as the missing LDAP server).
Because of these errors, while other configuration elements (such as source and destination interfaces, actions, and services) are properly set, the user configuration for"student"isnot applied.
Evaluation of the answer options:
* A. Policy ID 2 is installed in the disabled state.
* This isfalse. There is no indication in the log that Policy ID 2 is disabled.
* B. Policy ID 2 is installed without the remote user student.
* This istrue. Due to the failure in setting the"student"user (as indicated by the errors), the policy will be installedwithoutthat user being properly configured.
* C. Policy ID 2 will not be installed.
* This isfalse. The policy is installed, but the user configuration failed. The rest of the policy configuration appears to have proceeded without critical errors that would prevent the installation.
* D. Policy ID 2 is installed without a source address.
* This isfalse. The log shows that the source address is properly set to "all" (set srcaddr all), so this is not the cause of the issue.
From the log exhibit, we see errors related to the "ldap-server" attribute not being set and an error with the entry "student" not being found in the datasource. This indicates that Policy ID 2 will not be installed due to missing or incorrect data required for successful installation. The "Command fail. Return code -3" confirms the installation failure, so the correct answer is C.
Options A, B, and D are incorrect because:
* A suggests the policy is installed in a disabled state, which isn't supported by the log.
* B and D suggest partial installation, but the error messages indicate a complete failure to install Policy ID 2.
FortiManager References:
* Refer to FortiManager 7.4 Troubleshooting Guide: Common Errors and Log Interpretation.
NEW QUESTION # 39
An administrator has assigned a global policy package to custom ADOM1. Then the administrator creates a new policy package. Fortinet. in the custom ADOM1. What happens to the Fortinet policy package when it is created?
- A. You can select the option to assign the global policies.
- B. You must assign the global policy package from the global ADOM.
- C. The global policy package is automatically assigned.
- D. You must reapply the global policy package to ADOM1.
Answer: C
Explanation:
When a new policy package is created in a custom ADOM that already has a global policy package assigned, the global policy package is automatically assigned to the new policy package. This behavior ensures consistent policy enforcement across different ADOMs.
Options A, C, and D are incorrect because:
* A and C incorrectly suggest that manual reassignment or reapplication is needed.
* D implies optional assignment, whereas it is automatically done.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Working with Global and Custom ADOM Policy Packages
NEW QUESTION # 40
Refer to the exhibit.
Which two results occur if the script is run using the Device Database option? (Choose two.)
- A. The device Config Status is tagged as Modified.
- B. The script history shows successful installation of the script on the remote FortiGate device.
- C. You must install these changes on a managed device using the Install Wizard.
- D. The successful execution of a script on the Device Database creates a new revision history.
Answer: A,C
NEW QUESTION # 41
Refer to the exhibit.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?
- A. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.
- B. During discovery. FortiManager uses only the FortiGate serial number to establish the connection.
- C. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
- D. During discovery. FortiManager sets the NATed device IP address on FortiGate.
Answer: A
NEW QUESTION # 42
Exhibit.
Given the configuration shown in the exhibit, which two statements are true? (Choose two.)
- A. FortiManager is in workflow mode.
- B. The FortiManager ADOM is locked by the administrator.
- C. The FortiManager ADOM workspace mode is set to Normal
- D. An administrator can also lock the Local-FortiGate_root policy package.
Answer: A,D
NEW QUESTION # 43
Refer to the exhibit.
An administrator is about to add the FortiGate device to FortiManager using the discovery process.
FortiManager is operating behind a NAT device, and the administrator configured the FortiManager NATed IP address under the FortiManager system administration settings.
What is the expected result?
- A. During discovery, FortiManager sets the FortiManager NATed IP address on FortiGate.
- B. During discovery. FortiManager uses only the FortiGate serial number to establish the connection.
- C. During discovery, FortiManager sets both the FortiManager NATed IP address and NAT device IP address on FortiGate.
- D. During discovery. FortiManager sets the NATed device IP address on FortiGate.
Answer: A
Explanation:
When adding a FortiGate device to FortiManager that is operating behind a NAT device, and the FortiManager NATed IP address is configured under the system administration settings, FortiManager will set the FortiManager NATed IP address on the FortiGate device during the discovery process. This ensures that the FortiGate knows how to reach the FortiManager through the NAT device.
Options A, B, and C are incorrect because:
* Ais incorrect because the discovery process also requires knowing the NATed IP to establish a connection, not just the serial number.
* Bis incorrect because FortiManager does not set the NAT device's IP address on the FortiGate.
* Cis incorrect because it implies that the NAT device IP is set on FortiGate, which is not the expected outcome.
FortiManager References:
* Refer to FortiManager 7.4 Administrator Guide: Device Discovery and Management with NAT.
NEW QUESTION # 44
An administrator enabled workspace mode and now wants to delete an address object that is currently referenced in a firewall policy. Which two results can the administrator expect? (Choose two.)
- A. FortiManager will not allow the administrator to delete a referenced address object until theylockthe ADOM.
- B. FortiManager will replace the deleted address object with the none address object in the referenced firewall policy.
- C. FortiManager will disable the status of the address object until the changes are installed.
- D. FortiManager will temporarily change the status of the referenced firewall policy to disabled.
Answer: A,B
NEW QUESTION # 45
What will be the result of reverting to a previous revision version in the revision history?
- A. It will tag the device settings status as Auto-Update.
- B. It win install configuration changes to managed device automatically.
- C. It will modify the device-level database.
- D. It will generate a new version ID and remove all other revision history versions.
Answer: C
NEW QUESTION # 46
Which statement about thepolicy lock feature on FortiManager is true?
- A. When a policy is locked, the ADOM that contains it is also locked.
- B. Policy locking is available in workspace normal mode.
- C. Locking a policy takes precedence over a locked ADOM.
- D. Administrators in the approval group can work concurrently on a locked policy.
Answer: B
NEW QUESTION # 47
......
Fortinet FCP_FMG_AD-7.4 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
Practice FCP_FMG_AD-7.4 Questions With Certification guide Q&A from Training Expert TestsDumps: https://actualanswers.testsdumps.com/FCP_FMG_AD-7.4_real-exam-dumps.html
