100% Pass Guaranteed Free 1z0-996-22 Exam Dumps May 19, 2023
Verified & Latest 1z0-996-22 Dump Q&As with Correct Answers
NEW QUESTION # 21
How many bill segment-related financial transactions do pay plans have?
- A. none
- B. one
- C. depends on the number of payments that is part of the pay plan
- D. unlimited
- E. depends on the number of bills that will contain the customer's pay plan commitments
Answer: E
NEW QUESTION # 22
How should you configure the derived values that are relevant for a device?
- A. Configure the derived values on the Final Measurement Type for the measuring components to be defined on the device.
- B. Configure the derived values on the Measuring Component Type for the measuring components to be defined on the device.
- C. Configure the derived values on the Measuring Component for the measuring components to be defined on the device.
- D. Configure the derived values on the Device Type for the derived values to be defined on the device.
Answer: A
NEW QUESTION # 23
Within the application, operational devices can be assets or components.
Which two statements are true about components? (Choose two.)
- A. Components can't have specifications.
- B. Components are not a class of assets.
- C. Components can be installed at locations.
- D. Components are attached to assets.
- E. Components have a disposition that tracks their location and status.
Answer: C,D
NEW QUESTION # 24
The base package usage transaction business object is represented by D2-UsageTransaction. The usage calculation engine or process drives the specifics of the usage to be calculated on this business object.
Based on this, which three configuration areas will have an impact on the usage calculation process? (Choose three.)
- A. VEE rule
- B. Factor Override
- C. Usage Rule
- D. TOU map
Answer: B,C,D
NEW QUESTION # 25
How many Tenders can a Payment Event have?
- A. no Tenders for Payment Events, only Payments
- B. one Tender per Payment Event
- C. one Tender for each form of Payment submitted
- D. one Tender for each account the payment is applied to
- E. no Tenders for Payment Events, only Payment Segments
Answer: C
NEW QUESTION # 26
Using a base-supplied algorithm type, what is payment distribution priority typically determined by?
- A. Customer Class and Service Agreement Type
- B. Payment Type + Debt Age
- C. Debt Age
- D. Customer Class and Debt Age
- E. Service Agreement Type's Priority and Debt Age
Answer: D
NEW QUESTION # 27
Measuring components are either subtractive or consumptive.
Which statement correctly describes these two concepts?
- A. Subtractive measuring components are associated with deductive meters, whereas consumptive measuring components are not.
- B. Subtractive measuring components are used to measure demand, whereas consumptive measuring components are used to measure how much was consumed since the previous reading.
- C. A subtractive measuring component's consumption for a given period of time is the end measurement minus the start measurement. A consumptive measuring component's consumption is simply the measurement itself, and represents the consumption for the period of time since the previous measurement was taken.
- D. Subtractive measuring components are associated only with water service, whereas consumptive measuring components are for gas and electric services.
Answer: B
NEW QUESTION # 28
In addition to sets of procedures, and careful handling instructions for hazardous or delicate materials, what can Specifications include to provide information about assets or other entities?
- A. Specifications
- B. Attributes
- C. Rules
- D. Conditions
Answer: A
NEW QUESTION # 29
Your implementation requires an installation of two types of devices:
Electric Smart Meter
Gas Manual Meter
Which two Device Type attributes are required to identify these device types? (Choose two.)
- A. Valid Measuring Component Types
- B. Manufacturer
- C. Serial Number
- D. Service Type
- E. Device Business Object
Answer: A,D
NEW QUESTION # 30
Which statement supports usage transaction calculation?
- A. Bill determinants are derived from the initial measurement data of the measuring components devices installed at the usage subscription's service points during calculation period.
- B. Bill determinants are derived from the initial measurement data of the measuring components installed at the usage subscription's devices during the calculation period.
- C. Bill determinants are derived from the final measurements of the measuring components or devices installed at the usage subscription's service points during the calculation period.
- D. Bill determinants are derived from the final measurements for only interval measuring components or devices installed at the usage subscription's service points during the calculation period.
Answer: C
NEW QUESTION # 31
When a customer has a specific price for a defined quantity which is different to other customers, where is this specific price for the related Bill Factor defined?
- A. Bill Factor Value
- B. Account Characteristic
- C. Bill Factor Characteristic
- D. Service Agreement - Contract Value
- E. Calculation Rule
Answer: D
NEW QUESTION # 32
On which three entities can proration be disabled? (Choose three.)
- A. Rate Schedule
- B. Calculation Rule Business Object
- C. Rate Version Calculation Group
- D. Bill Factor
- E. Calculation Rule
Answer: A,B,C
NEW QUESTION # 33
Your client has installed scalar devices to measure the solar energy generated (Export) and the energy received (Import) from the National Grid. This data is stored in separate measuring components (registers).
The validation rules are generally the same for both measuring components, but there is one exception. The Negative Consumption check applies only to energy received (import).
Which two are possible configurations resulting in the Negative Consumption rule being checked for energy received (import) only? (Choose two.)
- A. Create two different VEE groups.
- B. Modify the base VEE rule.
- C. Use Eligibility Criteria.
- D. Use the Skip Flag in the VEE rule.
- E. Remove the Negative Consumption check from the VEE group.
Answer: A,C
NEW QUESTION # 34
How many service agreements are linked to a severance process?
- A. all service agreements that are connected to the initiating overdue process
- B. one
- C. any number defined by the business user
- D. zero - accounts are linked to severance processes
- E. all service agreements that are connected to the initiating collection process
Answer: C
NEW QUESTION # 35
As part of the service order processing, the algorithm D1-CNSPINSDV (Connect SP and/or Install Device) determines if a specific activity needs to be created based on the state of the service point.
Based on the status of the service point, what can this algorithm create?
- A. Device
- B. Device Configuration
- C. Service Point
- D. Smart Meter Command
Answer: C
NEW QUESTION # 36
Which two are "Are SP and Device Ready?" state algorithms for Enable Service? (Choose two.)
- A. Start Service Agreement
- B. Check for Measurement
- C. Create Usage Subscription
- D. Customer Device Compatibility Check
- E. Create Service Point
Answer: B,D
NEW QUESTION # 37
How many devices can be installed at a service point at an instance in time?
- A. exactly one device
- B. one for each measuring component
- C. one for each service type
- D. up to three devices
Answer: A
NEW QUESTION # 38
What correctly describes the possible causes of price proration?
- A. changes in Rate Version Calculation Group and Bill Factor only
- B. change in Rate Schedule only
- C. change in Rate Version Calculation Group only
- D. changes in Rate Schedule and Bill Factor only
- E. change in Bill Factor only
Answer: D
NEW QUESTION # 39
New: An electric utility is starting an Advanced Meter Infrastructure (AMI) roll-out for their residential customers. The initial plan is to roll out devices from their manufacturer with potentially three different device models. The customer has not decided what head-end systems they will use to communicate with these devices. Based on the customer's initial roll-out strategy, the devices will have to be configured consistently to support existing tariffs for billing.
Which is a valid consideration to determine the setup of device type administrative data for this implementation?
- A. the device's date of manufacturer
- B. valid head-end systems, valid device configuration types, and the electricity service type
- C. billing usage rules
- D. the model number
Answer: A
NEW QUESTION # 40
A usage subscription must exist before usage transactions can be calculated for a specific service point.
Where do you configure the usage recipient?
- A. in the Service Point Type
- B. in the Usage Subscription Type
- C. in the Usage Rule Type
- D. in the Measuring Component Type
- E. in the Device Type
Answer: B
NEW QUESTION # 41
When a service agreement is created, it is based on a template called the Service Agreement Type (SA Type) and values may be defaulted from a Start Option.
Which three attributes can get defaulted from a Start Option? (Choose three.)
- A. Service to be billed
- B. Rate
- C. CIS Division
- D. Contract Quantities
- E. Terms and Conditions
Answer: A,D,E
NEW QUESTION # 42
How do you ensure that specific Validation, Editing, and Estimation (VEE) rules are applied to estimated measurements?
- A. by adding the VEE Group to the Device Type
- B. by adding the estimation rules to the Manual Override VEE Group to the Measuring Component Type
- C. by adding the VEE Group to the Device Configuration Type
- D. by adding the VEE Group as the Fallback VEE Group for the appropriate VEE role
Answer: B
NEW QUESTION # 43
Your client has three requirements:
1. Apply validations on meter reads coming from the Data Collectors.
2. If a meter read does not pass the validation, an error will be generated and assigned to a user.
3. Retry the validation every 30 minutes for the errors in case the issue is related to configuration.
Which statement describes the base functions you should use?
- A. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be manually loaded.
- B. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-COMP-TD (Complete To Do Entries).
- C. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-CRE-IMDTD (Create To Do)
- D. If a To Do entry is created on the VEE exception, the IMD's Next Retry Date/Time is set to 30 minutes, and then processed by the algorithm D1-IMD-RETRY (Retry Initial Measurement Data Processing)
- E. If a To Do entry is created on the VEE exception, the user will need to discard the IMD and a new IMD will be loaded after 30 minutes.
Answer: C
NEW QUESTION # 44
Approval Profiles control which aspects of an Adjustment?
- A. whether the adjustment should appear on the customer's next bill
- B. whether current and/or payoff balance are affected by the adjustment
- C. control how adjustments are approved
- D. information defaulted on an Adjustment
- E. if an adjustment requires approval before it's frozen
Answer: B
Explanation:
Reference:
%20Adjustment%20Approval.pdf
NEW QUESTION # 45
There has been a meter exchange at a service point in the past year.
How many installation events exist for the service point for the past year?
- A. Three
- B. Two
- C. Four
- D. None
- E. One
Answer: E
NEW QUESTION # 46
......
The Oracle 1z0-996-22 certification exam covers a wide range of topics related to the implementation of Oracle Utilities Customer Cloud Service 2022, including installation, configuration, and customization of the solution. Candidates will be tested on their knowledge of the different modules of the Oracle Utilities Customer Cloud Service 2022, including customer service, billing, and meter data management.
Latest 1z0-996-22 dumps - Instant Download PDF: https://actualanswers.testsdumps.com/1z0-996-22_real-exam-dumps.html
